can-blast logo

Loading Hose Connectors

The aluminum hose connector is used to attach the semi-conductive loading hose to the pneumatic cartridge loader body.

This connector makes the air seal against the locking cam to direct the air flow down the loading hose. Also, it establishes the electrical connection between the loader body and loading hose, so that any static charges that are produced during the loading process are safely dissipated to ground.

It is critical that you have the correct hose connector size to ensure a smooth transition of the explosive cartridges from the loader body to the semi-conductive loading hose.

  • GD125 Series Connectors for ANFO chargers

    Hose Connector

    The GD125 series hose connector are used on the Can-Blast ANFO product line.

    PART# DESCRIPTION:
    GD125-5/8" Aluminum Hose Connector For Use With 5/8" semi-conductive loading hose.
    GD125-3/4" Aluminum Hose Connector For Use With 3/4" semi-conductive loading hose.
    GD125-1" Aluminum Hose Connector For Use With 1" semi-conductive loading hose.
  • GD150 and GD200 Series Connectors for Cartridge Loaders

    Smooth Bore Hose Line
    • GD150 series connectors are used with cartridge loader models CB32R and CB32RM.
    • GD200 series connectors are used with cartridge loader models CB42R and CB42RM.
    PART# DESCRIPTION:
    GD150-25mm Aluminum Hose Connector For Use With 1” / 25mm Product
    GD150-30mm Aluminum Hose Connector For Use With 1-1/8” / 30mm Product
    GD150-32mm Aluminum Hose Connector For Use With 1-1/4” / 32mm Product
    GD200-32mm Aluminum Hose Connector For Use With 1-1/4” / 32mm Product
    GD200-38mm Aluminum Hose Connector For Use With 1-1/2” / 38mm-40mm Product
  • Loading Hose Extension Kit

    Longitudinal Grooves in loading hose

    The aluminum hose extension kits allow for addition sections of semi-conductive loading hose to be attached to the cartridge loader.

    The extension kits reduce the number of times the loader and boxes of cartridges have to be moved and resetup during the loading process.

    For the hose extension kits to work properly the connectors must be installed as per the instructions in the users manual proved with the cartridge loader.

    Each extension kit contains QTY: 1 standard hose connector, QTY: 1 Threaded hose connector, QTY: 1 Cam-Lock, QTY:2 Hose Clips, QTY:1 Installation instructions.

    PART# DESCRIPTION:
    GD150-25mm-HEK Extension Kit for 25mm Semi-Conductive Loading Hose.
    GD150-30mm-HEK Extension Kit for 30mm Semi-Conductive Loading Hose.
    GD150-32mm-HEK Extension Kit for 32mm Semi-Conductive Loading Hose.
    GD200-32mm-HEK Extension Kit for 32mm Semi-Conductive Loading Hose.
    GD200-38mm-HEK Extension Kit for 38mm Semi-Conductive Loading Hose.